News

On your attention we offer anti-vibration pad MEGAMAT of Isolgomma. The most common area of ​​application of this product is to reduce the vibrations resulting from the operation of the machines in order to reduce volume,to reduce health risks for people who are exposed to noise and vibration, to improve and extend life of the machine and its reliability. Owing to the special structure of rubber fibers and granules, this product is extremely effective against high and low frequency vibration. MEGAMAT series of Isolgomma allows reducing the levels of vibration and noise transmission according to the European requirements for both residential and industrial buildings. It is widely used in work on rotating machinery, engines, lathes and looms, presses and compressors, cutting and processing machines. Suitable for installation in air conditioning systems and equipment processing air generators and others. In the housing it is suitable for installation in washing machines, dishwashers and other household appliances, creating vibrations.  Isolgomma is a company that from many years produces materials, insulating the vibrations in the sphere of housing and industrial construction. Investing continuously in research and development of products , Isolgomma continues to create innovative solutions and high quality products. Megamat is suitable for lying under tables and/or floating floors that provide partial or complete isolation of vibration caused by heavy or light machinery and precision equipment. Thanks to its special structure of rubber fibers and granules and a wide range of available thicknesses and densities , this series is extremely effective against high and low frequency vibration.

The company " DI TRADE GROUP " Ltd. offers advanced, innovative solutions to improve the sound insulation of existing buildings and to reduce the problems caused by impact noise. We represent the products of the Italian company Isolgomma- SylCer, Sylwood and Upgrei on the Bulgarian market. - Sound insulation under ceramic and stone flooring SylCer is specially developed innovative and high quality flooring ideal for noise reduction in old and new buildings, which is intended to be applied ceramic or stone finish. The SylCer line is rolled insulating material with high density and a small thickness, made ​​of SBR and EPDM reclaimed rubber, which absorbs the noise of walking. It is applied directly over existing flooring /without destroying/ or on beton. Compact, slim and environmentally friendly material, adapted to be applied when heated floors. - Sound insulation in natural and laminate flooring Sylwood is thin rubber mat from revised high density SBR and added cork granules that absorb the noise from walking, specially designed for installation under natural or laminate flooring. This product is designed to meet all requirements for sound insulation in new or improving existing wooden flooring. Sylwood is clean rolled material with thin and easy installation, suitable even when heated floors. - Sound insulation and thermal insulation 8 mm Upgrei line is an innovative range of products for acoustic and thermal insulation of floors. Developed with the latest technology this range gives outstanding results when used in the making of concrete floors. The products, which are based on proven technology Grei are made of special EPDM rubber granules and a layer of polyester fiber. The combination of these two materials provides a product with extremely high acoustic, thermal and mechanical properties.

The longtime partner of "Di Trade" - "IZOCAM" once again proved that not only it is the undisputed leader in the production of insulating materials of rock and glass wool, but a completely new look at building construction, namely passive houses. The name "passive" is due to the fact that the building is no need for active heating and cooling systems. These buildings do not differ in any of the other and each already built house can be transformed into passive.   On the seminar organized by company the "Di - Trade" in Sofia, Dr. Kemal Gani Bayraktar - technical marketing manager "IZOCAM" familiarize attendees partners and friends of the company that it is possible to build or renovate a building with a high degree of living comfort at extremely low power consumption. Through its program: Saint-Gobain Multi- Comfort (http://www.izocam.com.tr/p191-multi-comfort-houses.html) Izocam aims to minimize environmental impact, and focuses on komforta and welfare of residents (thermal and acoustic comfort, quality of indoor air, safety ...). Presented were executed projects of this type houses - both renovated buildings and newly built residential and public buildings. The concept of multi - comfortable house allows greater flexibility in designing the interior and exterior, reduces heat consumption, reduced and emisiite of CO2. The construction of passive houses in Bulgaria is gaining momentum. Perceived energy crisis is an incentive for more users to realize for the operating costs of buildings and the need for radical measures to energy efficiency. The building of a passive house is more expensive than standard construction, but in the long term with a similar building is paid initial investment because it saves energy for its heating and cooling. It is believed that a passive house consumes 4 times less energy than a conventional house. To be a home or building passive in their construction observe many rules and requirements for izolaziya. In practice, all building elements are isolated, and the links between them. The windows are necessarily three-compartment and the middle glass is with low emission. The walls, floors and the ceilings are isolated. Most commonly, after installation of the insulation, the wall thickness reaches and exceeds 30 cm in order to fulfill the standard of heat transfer - less than 0,15 W/m2. The doors are also well insulated and sealed on all sides.
In passive houses the annual cost of heating, cooling and ventilation systems should not exceed the total value of 15 kWh / m2 living (habitable) area. On the other hand, the amount of energy consumption for heating, hot water and electrical work must not exceed 120 kWh / m2 per year.

Thermal insulation for facades: the isolation of the outer walls can be executed on the outside of the wall. to be placed between two layers of bricks /sandwich/ or at least inside of the wall. The insulation can be stone wool or EPS /expanded polystyrene/. It is not recommended insulation with XPS /extruded polystyrene/ because the material is not vapor permeable and worsens the microclimate in the building, leading to the occurrence of condensation and mold. According to the recent amendments to the ordinance N7 energy efficiency (since 2009), the minimum insulation thickness going from 5 cm to 8 cm (EPS-density 16-18 kg/m3, and λ = 0.032 calculated for the outer wall bordering the outside air and the heat transfer coefficient u = 0.35 W/m2K). For stone wool, depending on the density, the thickness of the insulating layer increases from 6 cm to 9 cm. Insulation with EPS: it is used several types of facade EPS which are different in their density and thermal conductivity λ. 
The sequence of layers is : 1. Adhesive for thermal insulation 2.EPS-F Termoren 12-14 kg/m3 EPS-F Termoren 14-16 kg/m3 EPS-F Termoren 16-18 kg/m3 EPS-F Termoren 18-20 kg/m3 3. PVC anchor/dowel nail 4. Reinforcing Mesh 145g/m2 5. Plaster for thermal insulation 6. Primer: contact primer 7. Сoat Insulation with rocкwool, used wool high density of 130 to 150 kg/m3, which have sufficient mechanical strength to withstand the relevant loads: 1. Adhesive for thermal insulation 2. Rockwool - Izocam facade wool 140 kg/m3 3. PVC anchor/dowel nail 4. Reinforcing Mesh 145g/m2 5. Plaster for thermal insulation 6. Primer: contact primer 7. Сoat Insulation with rock wool , used wool high density of 130 to 150 kg / m3 , which have sufficient mechanical strength to withstand the relevant loads : 1.Lepilo for insulation Denel LP 21 2.Kamenna wool Knauf Rock Fas Izocam facade wool 140 kg / m3 3.PVC anchor / dowel nail Koelner 4.Armirashta net 145 g . / M2 5.Shpaklovka for insulation Denel LP 21 6.Grund : Denel contact Primer 7.Mazilka Denel
Insulation with rock wool , used wool high density of 130 to 150 kg / m3 , which have sufficient mechanical strength to withstand the relevant loads : 1.Lepilo for insulation Denel LP 21 2.Kamenna wool Knauf Rock Fas Izocam facade wool 140 kg / m3 3.PVC anchor / dowel nail Koelner 4.Armirashta net 145 g . / M2 5.Shpaklovka for insulation Denel LP 21 6.Grund : Denel contact Primer 7.Mazilka Denel
Insulation with rock wool , used wool high density of 130 to 150 kg / m3 , which have sufficient mechanical strength to withstand the relevant loads : 1.Lepilo for insulation Denel LP 21 2.Kamenna wool Knauf Rock Fas Izocam facade wool 140 kg / m3 3.PVC anchor / dowel nail Koelner 4.Armirashta net 145 g . / M2 5.Shpaklovka for insulation Denel LP 21 6.Grund : Denel contact Primer 7.Mazilka Denel
Adhesive for insulation
reinforcing Mesh

From the beginning of 2016 ET "Di-Trade-Ani Tzonevska" is became a part of our new company - "DI TRADE GROUP" LTD. The new company is the result of the company's strategy for expansion in Bulgaria. Using the new name " DI TRADE GROUP " we continue to work accurately and fairly with our customers as before. The owner of the company and our main contact persons remain the same. Phone numbers, addresses of offices and shops that offer our products remain unchanged. Most importantly, our biggest commitment remains as before - to provide you flexible and constructive solutions, quality products at affordable prices and information of all your questions. We hope to continue working so beneficial with all our partners and customers! "Invest today to save tomorrow!"      The team of "DI TRADE GROUP"